Results 1 to 6 of 6

Thread: HI from Sydney

  1. #1

    Default HI from Sydney

    HI all, Thanks for access to the forum.

    I have been volunteered to do some work on my partner's 1973 superbug (I think). Have found a pinhole leak in the brake line that runs in the cabin. Is this a job that can be done at home?




    many thanks

    Darrin
    Last edited by Darrinh; 06-04-2021 at 12:44 PM.

  2. #2

    Default

    Hoyhoy.

    Sounds like a replacement hose should do the job, may be a tailor made in this case, then afterwards with a bleed ya should be able to do it yourself.
    Plus welcome aboard bud.
    Hooroo. Eddy
    06 Shadow Blue POLO GTI

  3. #3

    Default

    yeah, I wouldn't be 'repairing' brake lines, but replacing them. Are you good with a spanner? If not, you can give a mobile company a call who will come and do it at your place...

  4. #4

    Default

    Hi jnrdavo, am handy with a spanner and have done brake work before. From what I've read, you can buy replacement metal lines but need a tube-bender to finish? Apparently I'll need to remove the backseat where the line exits the cabin and joins to a 'T' to replace it. I'm thinking that its also probably worth replacing the rubber lines as well and maybe the MC for good measure.

    It seems like a decent size task, would a mobile company do that?

    many thanks

    Darrin

  5. #5

    Default

    Quote Originally Posted by Eddy View Post
    Hoyhoy.

    Sounds like a replacement hose should do the job, may be a tailor made in this case, then afterwards with a bleed ya should be able to do it yourself.
    Plus welcome aboard bud.
    Hi Eddy,

    It all started because the brakes felt somewhat spongy, so I thought I'd replace the fluid and bleed. Started with the rear right wheel but no fluid was coming out when pressing the pedal Found it was leaking under the drivers floor mat, squirting out of a pin hole in the line, so looking to replace the entire line, just wondering if its something that can be done at home.


    cheers
    Darrin

  6. #6

    Default

    I'm not sure if it would be cheaper getting in mobile company than taking it to a specialist.
    Obviously gibing a few of them a call will give you approx. pricing. I think because you know exactly what you want, somebody should be a ble to give you a fixed price... or do it yourself if you have the time. In most circumstances, you will need to bend the lines somewhere. If only small bend, then you can do by hand, but any serious ones will need the proper bending equipment.
    There are quite a few videos on YouTube on bending the lines.

    Sent from my SM-G985F using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •